Compare material properties
Compare grades using piezoelectric coefficients, mechanical quality factor, dielectric loss and operating temperature.
MATERIALS / 02
Hard and soft PZT grades can be compared for ultrasonic transduction or precision actuation.

| Property / Symbol / Unit | Hard PZT | Soft PZT | |||||
|---|---|---|---|---|---|---|---|
| PZ10 | PZ13 | PZ17 | PZ19 | PZ44 | PZ48 | PZ57 | |
| Relative permittivityεT33/ε0 | 1000 | 1350 | 1800 | 1900 | 4200 | 4600 | 5400 |
| Dielectric losstan δ | ≤0.004 | ≤0.004 | <0.03 | <0.03 | <0.03 | <0.03 | <0.03 |
| Piezoelectric coefficientd33 (pC/N) | 250 | 320 | 360 | 380 | 650 | 640 | 730 |
| Electromechanical couplingkp | 0.56 | 0.57 | 0.63 | 0.65 | 0.70 | 0.68 | 0.70 |
| Electromechanical couplingk33 | 0.65 | 0.68 | 0.70 | 0.72 | 0.73 | 0.75 | 0.73 |
| Electromechanical couplingkt | 0.49 | 0.47 | 0.48 | 0.49 | 0.50 | 0.50 | 0.50 |
| Mechanical quality factorQm | 1000 | 1380 | 80 | 85 | 60 | 60 | 60 |
| Frequency constantNt (Hz·m) | 2070 | 2050 | 2000 | 2100 | 2000 | 2000 | 2000 |
| Densityρ (g/cm³) | 7.6 | 7.6 | 7.7 | 7.9 | 7.9 | 7.9 | 7.9 |
| Curie temperatureTC (°C) | 320 | 315 | 350 | 350 | 230 | 220 | 175 |
Relative permittivity is expressed as εᵀ₃₃/ε₀. Contact our technical team for material selection and processing configurations.
Compare piezoelectric coefficient, mechanical quality factor and dielectric loss, then specify geometry and dimensions.
SELECTION & CUSTOMIZATION
Compare grades using piezoelectric coefficients, mechanical quality factor, dielectric loss and operating temperature.
Describe the required shape, dimensions, electrodes and poling, such as plates, rings or tubes.
Share frequency, drive conditions and installation space to discuss a suitable material.
Please share your application, target properties and drawing requirements. Final specifications are confirmed for the selected material and configuration.